The touchable test strips with capillary action require a very small blood sample (1 microliter). It's your choice: With the Accu-Check Active Meter, you can apply blood to the test strip in or out of the meter. Choose what works best for you. Performing a test with Accu-Chek Active is fast and easy. First insert a test strip until it clicks into place with the orange pad facing up and the arrow pointing toward the meter.

Check that the code number displayed matches the code number on the vial of strips you are using. Once the flashing blood drop symbol appears, you have two minutes to apply the drop of blood. Use an Accu-Chek Softclix lancet device to obtain a drop of blood.

Apply one drop of blood to the center of the square orange pad. Wait for result. Accu-Chek Active also offers the convenience of dosing the strip outside the meter. To run a blood test, insert a test strip until it clicks into place with the orange pad facing up and the arrow pointing toward the meter.

Check that the code number displayed matches the code number on the vial of strips you are using. Once the flashing blood drop symbol appears, you have two minutes to apply the drop of blood. Use an Accu-Chek Softclix lancet device to obtain a drop of blood. Remove the strip from the meter. Within 20 seconds, apply a drop of blood to the center of the orange pad and reinsert the strip. The meter will beep to let you know the test has started. In approximately ten seconds the result is displayed.